LED tunnel lighting is a type of LED floodlight. It can be used for large-area flood lighting in tunnels, factory workshop lighting, warehouse lighting, large venue lighting, engineering construction and other places. It is also suitable for urban landscapes, billboards, buildings Facade lighting. However, with so many LED tunnel lighting options on the market, it can be difficult to find the right light for your needs. To make your decision a little easier, we’ve put together everything you need to know about choosing the right LED tunnel floodlight.
In this guide:
What is LED tunnel lighting?
LED tunnel lights are lights that use LED as a light source for tunnel lighting. Tunnel lighting can improve the road conditions in the tunnel, improve visual enjoyment in the tunnel, reduce driver fatigue, and help improve tunnel traffic capacity and ensure traffic safety.
Lighting standards for led tunnel lights
According to CIE specifications, the brightness of tunnel lighting at night must be equal to the brightness value of the passage area. The full-section brightness value should not be less than 1 cd/m2, the uniformity should not be less than 0.4, and the longitudinal uniformity must be greater than 0.6 [19].
What are the advantages of LED tunnel floodlights?
LED tunnel floodlights are usually installed at the top of the tunnel or on both sides of the wall. Their function is to provide a bright lighting environment for vehicles, making it easier for drivers to observe road conditions and respond in a timely manner. At the same time, the brightness and color temperature of tunnel lights also need to be adjusted according to different tunnel lengths and traffic volumes to ensure the best visual effects and comfort.
What are the disadvantages of LED tunnel floodlights?
In addition to LED light sources, LED tunnel lights have higher requirements for other supporting equipment. For example, the light body must be made of materials with good heat dissipation. At present, aluminum light bodies with good thermal conductivity are mainly used and equipped with radiators; LED tunnel light drivers The power supply must use constant current output to power the LED lamp beads. If the current is too large, there is a risk of burning out the LED chip. If the current is too small, the luminous flux will be low, and the brightness will not be enough. If the current is not constant, the light will flicker, etc.
Why choose LED tunnel floodlights
First of all, from the perspective of tunnel lighting effects, in addition to considering the installation position and brightness adjustment of lamps, it is also necessary to pay attention to the reflection and anti-glare design of the light. The light inside the tunnel will reflect. If the lighting is inappropriate, it will cause dazzling and visual fatigue, affecting the safety of the driver. Therefore, the reflection and anti-glare design of tunnel lights is also a very important task.
LED tunnel floodlights use lamp beads composed of multiple small LEDs, which can provide uniform, soft, and dark-angle-free light and can effectively illuminate a larger area. Spotlights use a single high-power light source, which can concentrate light and provide a strong lighting effect.
Secondly, from the aspects of energy saving and environmental protection, LED tunnel floodlights have obvious advantages. LED lamps use lower voltage and current to drive and can convert most of the energy into light energy. Compared with traditional spotlights, the energy saving effect is more significant. In addition, LED lamps have no ultraviolet and infrared radiation, are harmless to human health, and do not contain harmful substances such as mercury, complying with environmental protection requirements.
Choose the best LED tunnel floodlight for your project
Yagelai Lighting is a manufacturer specializing in the production of high-power LED floodlights for outdoor engineering lighting. LED tunnel floodlight is one of our hot-selling products. Our factory can produce 50W/100W/150W/200W/250W/300W/400W/500W LED tunnel floodlights for underground tunnel lighting modules. We warmly welcome you to buy or wholesale bulk LED tunnel lights LED floodlights from our factory. Wholesale outdoor engineering module tunnel lights.
Use our Aglare LED Tunnel Light LED Flood Light for outdoor spotlight lighting. Suitable for all tunnel and underpass areas in road and rail applications.